Herkules 3d - Problem

Traenenreiter

Meister
Registriert
1. Oktober 2002
Beiträge
411
Ich brauche wirklich dringend Eure Hilfe.

Ich habe mir Combat Mission 3 gekauft - das Spiel aber kann man nicht richtig spielen, weil der Text im Spiel total verdreht ist.

Auf der Fanseite fand ich folgenden Tipp:

Problem: Video Card uses the Kyro or Kyro II Chipset (ex: Hercules Prophet 4500) and text and graphics in-game are blurry or corrupted.

Cause/Solution: You will need to add a entry to the registry to clear up the corruption. Launch the Regedit program and locate the following key:

HKEY_LOCAL_MACHINE\SOFTWARE\PowerVR\
KYRO\Game Settings\D3D

You will need to add the following entry to that key.

[HKEY_LOCAL_MACHINE\Software\PowerVR\KYRO\Game Settings\D3D\CM Afrika Korps.exe] "DisableCopyBlt3D"="1"

NOTE: You must make sure that you enter that entry with the EXACT name of the game executable. If you for some reason have renamed your game .exe to be "CMAK.exe" for example that registry entry should look like this:

[HKEY_LOCAL_MACHINE\Software\PowerVR\KYRO\Game Settings\D3D\CMAK.exe] "DisableCopyBlt3D"="1"

Ich habe also mittels regedit den Eintrag gemacht - offensichtlich aber falsch, den es gab keine Auswirkungen.

Hier meine Fragen: 1.) kann mir bitte jemand eine Schritt für Schritt Anleitung geben, um o.g. auszuführen?
2.) Wie erkenne ich, welcher der "executable" Name ist?

Danke für die Hilfe im voraus.
 

Zerch

Ehrenmitglied
Registriert
10. April 2002
Beiträge
2.938
Schon mal nach Softwareupdates geschaut? (Grafikkartentreiber , Patch fürs Spiel usw.)

Weiterhin könnte es sein , daß das Programm hardwareseitiges Transform & Lighting benötigt. Der Kyro II chip verfügt aber über kein T&L. Vielleicht läuft das Programm auch ohne T&L , wobei es aber sein kann , daß dazu die Konfigurationsdatei manuell editiert werden muß.
 

Angel of Seven

Ehrenmitglied
Registriert
23. Juli 2002
Beiträge
3.560
Traenenreiter schrieb:
Hier meine Fragen: 1.) kann mir bitte jemand eine Schritt für Schritt Anleitung geben, um o.g. auszuführen?
2.) Wie erkenne ich, welcher der "executable" Name ist?

Danke für die Hilfe im voraus.


Cause/Solution: You can do the following at the expense of some performance loss. Go to Control Panel then click Display Control Panel and then the Settings tab. Click the Advanced button then click the 3D Optimization tab then click the Direct3D tab (default). Under the Control Full-Scene Anti-Aliasing make sure the setting 'Application specified anti-aliasing' is selected. Check mark the 'Enable External Depth/Stencil Buffer' and under that check the 'Enable External Depth/Stencil Buffer Storing'.

You may also need to disable Full Screen Anti-Aliasing if graphic corruption persists. You might want to view this thread from the Tech Support forum for a discussion on this issue:

Versuch das oben beschriebene noch zusätzlich....

"Executable Name" ist die ###.exe die beim Spielstart ausgeführt wird... also du gehst auf den Button mit dem du dein Spiel normalerweise startest --->rechte Maustaste ----> Eigenschaften----> da steht der Pfad mit der entsprechenden .exe welche der Executable Name ist, nämlich die EXE die du ausführst um das Spiel zu starten.


LG

AoS
 

haruc

Ehrenmitglied
Registriert
16. Dezember 2002
Beiträge
2.494
CM3 ist draußen?? Ich brauch das!

Ist es so gut wie CM2 oder besser? Ich meine von der Athmosphäre her?
*lEchz*

Spiele im moment aber Hearts Of Iron (selten)
 

Ähnliche Beiträge

Oben